Embedded Wallet-as-a-Service

With Turnkey, you can build a platform that distributes embedded wallets to your own customers. Your platform abstracts Turnkey behind your own SDK, APIs, or UI components. A 2-of-2 root quorum model gives your platform co-signing authority over every transaction, enabling billing gates, compliance checks, and risk controls at the infrastructure layer, while end users remain non-custodial.

Powered by Turnkey

DIMO — decentralized transportation network with 165,000+ connected vehicles. 90% reduction in onboarding time, 30% increase in completion rates. Built their own transactions SDK on Turnkey’s infrastructure

What makes Wallet-as-a-Service different

With consumer wallets and business wallets, your application integrates Turnkey directly and manages wallets for end users. With Wallet-as-a-Service, your platform is an intermediary layer: you build wallet infrastructure on top of Turnkey, and your customers integrate with your SDK rather than Turnkey directly. The defining pattern is the 2-of-2 root quorum. Both the end user and your platform must approve every fund-moving transaction. The end user authenticates via passkey (or equivalent), then your platform evaluates its own rules (billing status, compliance, risk) before co-signing. If either party withholds approval, the transaction does not execute. No transaction executes without the end user’s authentication. End users remain non-custodial because they can always export their keys independently, without platform approval.

When to use Wallet-as-a-Service

Scenario	Why Wallet-as-a-Service fits
Your customers embed wallets through your SDK, not Turnkey’s	You own the developer experience end-to-end. Downstream integrators never interact with Turnkey directly.
You need platform-level co-signing on every transaction	2-of-2 root quorum lets your platform enforce billing gates, compliance checks, or risk controls before any fund-moving transaction.
You want to white-label wallet infrastructure	Fork or wrap the Embedded Wallet Kit with your branding and expose your own APIs. Turnkey is invisible to your customers.

Architecture

Each end user maps to a Turnkey sub-organization. The sub-org contains the user’s wallets, credentials, policies, and activity logs, fully isolated from other users and from your platform’s management layer.

Transaction authorization flow

End user initiates a transaction from your embedded wallet UI
End user approves via their authenticator (e.g. passkey). Turnkey records the activity as partially approved
Your platform evaluates on its backend: billing status, risk/compliance rules, and any other checks
Your platform approves via API key and the transaction executes
If the platform withholds approval, the transaction does not execute

See Activities and approvals and Root quorum.

Implementation

Step 1: Define the tenant model

Map each end user to a sub-organization. One sub-org per end user.

Isolated tenants: Each sub-org is a self-contained data boundary with wallets, policies, authenticators, and activity logs fully isolated from one another.
Scoped parent org permissions: Your parent organization has read-only access to sub-orgs and can initiate auth and recovery flows, but cannot sign transactions or modify policies within them.
External mapping: Track the relationship between your platform’s user IDs and their corresponding Turnkey sub-org IDs in your own database.

See Sub-organizations and Root quorum.

Step 2: Design the sub-organization control model

Define what lives inside each sub-org and how control is shared between your platform and the end user.

End user (root): Authenticated via passkey or equivalent user-controlled authenticator.
Platform provider (root): Authenticated via API key. Used to approve or block transactions based on your service rules.
Delegated access (optional): For automation or backend-initiated workflows, add a scoped non-root API key via Delegated Access. This must be tightly policy-scoped and should never have broad signing authority or bypass user consent.

See Delegated Access and Policies.

Step 3: Create sub-org with wallet and export policy

Specify what gets created in every sub-org by default: wallet structure, supported chains/accounts, and baseline policies. For the 2-of-2 quorum model, establish the threshold last so your platform can configure policies (including export) with only your platform’s approval. Once the 2-of-2 quorum is established, the end user can trigger exports via the export policy without needing your platform’s co-signature. This keeps the co-managed model non-custodial: end users can always export their keys and access their funds directly, independent of your platform.

Step	Action	Quorum State
3a	Create sub-org with both root users + wallet	1-of-2
3b	Create export policy for end user	1-of-2
3c	Update threshold to 2	2-of-2

3a. Create sub-org with both root users at 1-of-2 threshold

const subOrg = await turnkeyClient.createSubOrganization({
  parameters: {
    subOrganizationName: `User Wallet - ${userId}`,
    rootUsers: [
      { userName: "Platform", apiKeys: [{ publicKey: PROVIDER_KEY }] },
      {
        userName: "End User",
        authenticators: [
          {
            /* passkey */
          },
        ],
      },
    ],
    rootQuorumThreshold: 1,
    wallet: {
      walletName: "Primary Wallet",
      accounts: [
        {
          /* eth account */
        },
      ],
    },
  },
});

3b. Create export policy (user escape hatch)

await turnkeyClient.createPolicy({
  organizationId: subOrgId,
  parameters: {
    policyName: "Allow User Wallet Export",
    effect: "EFFECT_ALLOW",
    consensus: `approvers.any(user, user.id == '${endUserId}')`,
    condition: `activity.type == 'ACTIVITY_TYPE_EXPORT_WALLET'
      && wallet.id == '${walletId}'`,
  },
});

3c. Raise threshold to 2-of-2

await turnkeyClient.updateRootQuorum({
  organizationId: subOrgId,
  parameters: {
    threshold: 2,
    userIds: [providerUserId, endUserId],
  },
});

See Export wallets and Policy examples.

Step 4: Build your integration surface

Create the SDK, APIs, or UI components that downstream developers will integrate with. Abstract Turnkey and expose only your platform’s intended wallet, auth, and signing flows.

Embedded Wallet Kit (EWK): Fork or wrap EWK components (authentication, wallet UI, approval prompts) with your branding. Surface “pending platform approval” states in the transaction flow.
Backend service: Handle platform root approvals (via API key), billing and risk evaluation, and activity monitoring through your backend.
SDK abstraction layer: Wrap Turnkey’s SDK calls behind your own interface for full control over the developer experience.

See Embedded Wallet Kit and SDK Reference.

Step 5: Wire the wallet into your platform flow

Integrate the wallet into your onboarding and runtime flows so every downstream integration inherits a working embedded wallet.

Onboarding: Handle Turnkey org setup, auth configuration, and the staged sub-org creation flow as part of user registration. The end user should experience passkey registration as a natural part of sign-up.
Client initialization: Initialize the Turnkey client with the user’s sub-org context on each session. Use sessions for batched signing workflows to reduce authentication friction.
Transaction flow: Surface the approval prompt via EWK components, submit the user’s approval to Turnkey, run your backend checks, then co-sign or withhold.
Recovery: Expose the export flow in your settings UI so users can self-serve wallet recovery. Turnkey’s enclave encrypts the mnemonic to a user-generated target key via HPKE. Neither Turnkey nor your platform can view the exported material.

Overview

Embedded Wallets

Company Wallets

Key Management

Cookbooks

Support

Embedded Wallet-as-a-Service

Powered by Turnkey

What makes Wallet-as-a-Service different

When to use Wallet-as-a-Service

Architecture

Transaction authorization flow

Implementation

Step 1: Define the tenant model

Step 2: Design the sub-organization control model

Step 3: Create sub-org with wallet and export policy

Step 4: Build your integration surface

Step 5: Wire the wallet into your platform flow

Next steps

​Powered by Turnkey

​What makes Wallet-as-a-Service different

​When to use Wallet-as-a-Service

​Architecture

​Transaction authorization flow

​Implementation

​Step 1: Define the tenant model

​Step 2: Design the sub-organization control model

​Step 3: Create sub-org with wallet and export policy

​Step 4: Build your integration surface

​Step 5: Wire the wallet into your platform flow

​Next steps

Powered by Turnkey

What makes Wallet-as-a-Service different

When to use Wallet-as-a-Service

Architecture

Transaction authorization flow

Implementation

Step 1: Define the tenant model

Step 2: Design the sub-organization control model

Step 3: Create sub-org with wallet and export policy

Step 4: Build your integration surface

Step 5: Wire the wallet into your platform flow

Next steps